The problem you are describing is similar to the one we had at our remote
POP's off older switches. What happened here is the modem lights would go
out. Completely dead, turn the modem off and on again and it was OK till
next time.
I occurs when ever the telco reverses polarity on the line. I am not a
telco genius, but we could reproduce the problem with the telco line techs,
test receiver.
I don't know of a cure, but if possibly the telco could change the way that
they terminate (end) the call, that might help.
JOhn :}
At 04:52 PM 5/6/99 +1000, you wrote:
>Sorry if this been asked before, but I'm new to the list.
>
>Need some advice on the best init strings for USR Courier V-Everything.
>
>Have a PM2e running an ISP service and am tired of having to reset
>locked up modems, when they lock up the only way they can be reset is
>with recycling the power to the modem....a port reset doesn't clear the
>problem.
>
>I have the latest flash in the modems
>
>
>Any ideas?????
>
>Roland Paton
>BITS Pty Limited
>
>-
>To unsubscribe, email 'majordomo@livingston.com' with
>'unsubscribe portmaster-modems' in the body of the message.
John C. Lange, Sr. PALACE dot NET, INC.
microjl@palacenet.net MICRO-TECH Computers, Inc.
608.742.1601 & 6980 1819 New Pinery Road
http://www.palacenet.net/ Portage, WI 53901
MSCE Training for only $150.00 - http://dpec.palacenet.net/
Authorized iPSwitch WebVar @ http://www.microt.com/iPSwitch/
--- __o
--- _-\<,_ Fastest Service in Town
--- (_)/ (_)
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.