Portmaster a) 3.8.2
normal 91.90% 54240/59019
"User Request - Call Circuit Closed" 7.32% 4320/59019
"Lost Carrier" 0.76% 446/59019
"Service Unavailable - Failed to detect V.42 remote" 0.01% 7/59019
"User Error - LAPM negotiation timeout" 0.01% 6/59019
Portmaster a) 3.8.2c2
normal 92.47% 3574/3865
"User Request - Call Circuit Closed" 6.49% 251/3865
"Lost Carrier" 0.80% 31/3865
"Port Error - Exceeded LAPM retransmission limit" 0.23% 9/3865
Portmaster b) 3.8.2
normal 91.33% 33834/37044
"User Request - Call Circuit Closed" 7.75% 2871/37044
"Lost Carrier" 0.88% 327/37044
"Service Unavailable - Failed to detect V.42 remote" 0.02% 6/37044
"Port Error - Exceeded LAPM retransmission limit" 0.01% 3/37044
"User Error - LAPM negotiation timeout" 0.01% 3/37044
Portmaster b) 3.8.2c2
normal 91.04% 2226/2445
"User Request - Call Circuit Closed" 8.14% 199/2445
"Lost Carrier" 0.61% 15/2445
"Port Error - Exceeded LAPM retransmission limit" 0.20% 5/2445
Has anyone seen any big changes ? I havent done any calculations, but I
would say the figures are within normal variance... i.e. I see results
bounce around 91% +-2% from day to day...
I guess its time to see if its the same set of users having the same
problems, or if its spread out across the board. I know with my Supra PCI,
I can usually stay on for a good day or so before getting a CCC... I am
about 2miles from the CO on most likely very old copper.
---Mike
**********************************************************************
Mike Tancsa, Network Admin * mike@sentex.net
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario * 01.519.651.3400
Canada *
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.