That would seem to indicate that a firmware update is needed from
www.lucent.com... what are the ATI responses... check the firmware
revision number... if it's less than 5.44, upgrade the modem first.
-my $5 worth-
--- Carlton Houston Carlton@Wavegate.COM - www.wavegate.com 706-238-9600x11 - "Internet Solutions for Home and Business"On Sat, 15 May 1999, ...Charlie... wrote:
> We have had good success limiting the connect speed in order to increase > throughput, try have them limit their speed to around 36 or 38 and then bump > it up 2k until the the throughput starts to slow. > > ...Charlie... > > > > > We're experiencing a problem with one user who is using a LT Winmodem > (Actiontec). He's getting extremely low throughput when connecting to the > PM4 at 45k or above(1.1 to 1.8bps) and when connecting to the V.34 pool he > regularly gets higher throughput. Some of this may be how the call is > routed out of his CO (a known issue). > > This seems odd since we have several users using the ActionTec modem and > it's proved to be very reliable and have gotten high throughputs. > > We've checked IRQ/DMA conflicts and haven't found a problem. The modem was > PnP installed on COM4 IRQ 11 and shows no conflicts. > > Anyone have any ideas? > > - > To unsubscribe, email 'majordomo@livingston.com' with > 'unsubscribe portmaster-users' in the body of the message. > Searchable list archive: <URL:http://www.livingston.com/Tech/archive/> > > - > To unsubscribe, email 'majordomo@livingston.com' with > 'unsubscribe portmaster-modems' in the body of the message. >
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-modems' in the body of the message.