Re: (PMOD) ISDN

Dennis Dow (ddow@cyberport.com)
Wed, 26 May 1999 10:15:32 -0600 (MDT)

For us, the opposite happened. 3.8.2c2 cured a bonding problem with ISDN
and now our ISDN folks are happier than ever. Our ISDN is strictly
dial-in, through a 5ESS using NI-1 using UAS T-1. Could there be a
switch related difference that is causing 3.8.2c2 to give you fits?

-----------------------------------------------------
Dennis Dow | CyberPort Station
ddow@cyberport.com | http://www.cyberport.com
The Four Corner's Internet Leader

On Wed, 26 May 1999, Philip Kish wrote:

After upgrading to 3.8.2c2 I have had a plethera of ISDN woes. Seems as
though ISDN's connect then drop after a few seconds, or they connect at all,
or only with one channel. They never hit our failure logs and the Telco
says that everything is ok with the lines. I am having problems from users
using 3Com Impact IQ, EICON DEVA Lan Modem, and I myself use a Pipeline 75
connecting from home and it takes at least 12 attempts to get both channels
connected.

Has anyone else had any problems with ISDN connections?

Thanks.

Philip

-

--


Philip Kish
~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://www.ithink.net ~~~~~~~~~~
iThink, Inc.


(941) 299-6372


For Support issues visit http://helpdesk.ithink.com


-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.


-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.