Thanks Jamin!!!
------------------------------------------------
From: "Jamin A. Brown" <jamin@gwi.net>
Subject: Re: (PM) USR modems not connecting with ComOS3.8.2 - need init
string?
USR 56K modems tend to work well with our system *except* for the
Winmodems. Even so, we often have to put in an init string on all of them
to get them to connect more reliably.
S32=34 Disables X2 (Which helps for some reason)
S32=66 Disables v.90
S32=98 Disables Both X2 and v.90
S13=64 Disables Fast Retrain (helps prevent disconnections)
&N## Sets a maximum speed, replace ## with 30 for 45333, 29 for
44000... etc.
These are what we typically use with our customers:
USR 56K Modems (the non-Win variety)
S32=34S13=64 we rarely have to use the &N## here, but sometimes do.
USR Winmodems
S32=98, or sometimes S32=34S13=64&N## setting the modem a good 3-5 speed
levels below its old maximum connection speed..
--------------------------------------------------
We did have some problems with the 3.8.2c upgrade which is why we
downgraded, but I think alot of it deals more with telco equipment
settings depending on your area.
Thanks-
Daniel W. Nagel
Ticon.Net, Inc Phone : 608-741-1594
930 N Parker Dr Toll-Free: 888-777-7101
Janesville, WI 53545 Fax : 608-754-7350
http://www.ticon.net
Hours: M-F: 8am-9pm, Sat: 9am-5pm, Sun: 10am-4pm
==========================================================
On Wed, 16 Jun 1999, Philip Buckley wrote:
> Hi everyone,
>
> I am having some serious problem with USR voice
> winmodems v.90 where they can't connect at all or take along time to
> connect. Do anybody knows how to solve the problem. I am using pm3 and
> ComOs 3.8.2
>
> -
> To unsubscribe, email 'majordomo@livingston.com' with
> 'unsubscribe portmaster-modems' in the body of the message.
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-modems' in the body of the message.