I believe you would be better off lowering the connect rate by using the &U
and the &N commands, the chart may be found at:
http://808hi.com/56k/x2-linklimit.htm
Good Luck.
Charlie
-----Original Message-----
From: owner-portmaster-modems@livingston.com
[mailto:owner-portmaster-modems@livingston.com]On Behalf Of Philip Kish
Sent: Thursday, July 29, 1999 7:56 PM
To: Portmaster Modem List
Subject: (PMOD) USR Model 5686
I have a client who has a USR Sportster External model 5686. This is a
great modem that we recommend, but I finally found a case where it is not
working properly.
This user is getting massive renegotiations:
show m36
Card Type: LU1674 Chipset
State: ACTIVE
Active Port: S19
Transmit Rate: 45333
Receive Rate: 28800
Connection Type: LAPM/V42BIS
Chars Sent: 1295034312
Chars Received: 230657058
Retrains: 0
Renegotiations: 6
Total Calls: 929
Modem Detects: 853
Good Connects: 853
show m36
Card Type: LU1674 Chipset
State: READY
Chars Sent: 1295056970
Chars Received: 230663290
Retrains: 1
Renegotiations: 14
Total Calls: 929
Modem Detects: 853
Good Connects: 853
I have a string that disables retrains for the USR WInmodem (S13=64) but I
need one for the Sportster 5686.. Please some one have one!
Thanks in advanced.
Philip
-
--Philip Kish ~~~~~~~~~~~~~~~~~~~~~~~~~~~ http://www.ithink.net ~~~~~~~~~~ iThink, Inc.
(941) 299-6372
For Support issues visit http://helpdesk.ithink.com
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-modems' in the body of the message.
- To unsubscribe, email 'majordomo@livingston.com' with 'unsubscribe portmaster-modems' in the body of the message.