Re: configuration problem

FFT (ry90@www.punkt.de)
Fri, 3 May 1996 10:40:22 +0200 (MET DST)

Hi,
> set all service_login rlogin
> save all
>
> ----------
> From: Mark Teicher[SMTP:mteicher@bbnplanet.com]
> Sent: Thursday, May 02, 1996 3:16 PM
> To: FFT; portmaster
> Subject: Re: configuration problem
>
> Basic answer
>
> set port_number service_login rlogin
> Save all
>
> I bet it works...
>
> In your radius.install notes, it discusses the issues related to
> service_login...
This does not save my problem. The key problem seems to be, that
my Portmaster is ignoring the radius output. Only persons that have
an account on my SUN are allowed to login, but the radius answer
is ignored by the portmaster. I only can give the people a shell
account, and no PPP or SLIP account via Portmaster.
Juergen
>
> At 21:09 5/2/96 +0200, FFT wrote:
> >Hi,
> >I have a (I think) simple configuration problem, but I am stuck
> >My system:
> >Portmaster 2e, Total COntrol Modem Rack, SUN with solaris.
> >Radius is on the SUN up and running. Modems connect, Portmaster
> >asnwers, ... Problems arise ;-)
> >What I want: User should connect to the portmaster, put in their
> >UID and passwd and then the portmaster asks radius if the user is
> >valid, and either connects or not.
> >At the moment no user can connect, regardless if valid of not.
> >I started radiusd with -x, and here is a small excerpt from
> >the output:
> >.-.-..-.-. cut here
> >radrecv: Request from host c24de801 code=1, id=59, length=56
> > User-Name = "ry90"
> > Password = "fancy passwort"
> > Client-Id = 194.77.232.1
> > Client-Port-Id = 4
> >Sending Ack of id 59 to c24de801 (194.77.232.1)
> > User-Service-Type = Login-User
> > Login-Service = Rlogin
> >.-.-.-.-.-.. cut here
> >ry90 is a valid user at the SUN system, and is a Login-User
> >set up at the users database of radius. But Login-Service
> >is PortMaster. Why is Radius saying: Rlogin???
> >.-.-.-
> >The other problem: The user is not accepted. It says:
> >login denied (or smoething similar). The ports are configured
> >as network dialin. Before they where configured as
> >Login/Network, and there I got the SUN prompt, and could
> >connect, although I had to type in the password twice... Why?
> >.-.-.-
> >I also want to configure PPP users, (or SLIP), that donno
> >have an account on the SUN. But it seems, the system does
> >not care about what I write into users database. Even with the
> >old port setting of Login/network nothing happened.
> >.-.-.-.
> >All help is apprechiated. I digged thru the manuals, but I could
> >not find anything.
> >The best thing I would which to have: A sample comfiguration
> >for PM2e and 10 Modems connected to any system, and how to set
> >the stuff up for login users, SLIP and PPP users.
> >.-.-.-
> >I personally have the feeling that some things with the PM2e
> >config is wrong, but I do not see what.
> >
> >Thanks very much for listening.
> >Juergen
> >