Re: trumpet winsock

Old Man (oldman@cosmo.mitec.net)
Wed, 14 Aug 1996 10:59:32 -0500 (CDT)

On Tue, 13 Aug 1996, James Stephens wrote:
> > We are currently experiencing problems when dialing to our USR Sportsters
> > connected to our PM2E-R30 with Trumpet Winsock for Windows 3.1. There will
> > be no problems on the first try. Disconnecting and reconnecting with the
> > same Trumpet session will not correctly detect the assigned IP address,
> > however. Does anyone have any ideas?
> Trumpet winsock won't display an address if it gets the same address as
> it had before. As long as your client calls back before their old number
> is re-assigned or while that number is unassigned, trumpet will
> negotiate the address.

Is there any way to have radius not allow any users to negotiate their IP
address, but rather assign them one dynamically from the IP pool?
Apparently, Trumpet negotiating the IP address is causing problems when
redialing in without closing the trumpet program. I know there is an
option in the Portmaster's users table to use assigned/specified/negotiated
addressing. In radius, the specified option exists (Framed-Address = xxx)
but how can I turn off the negotiated? Thanks.

/*******************************************************
** Lee Kuo Mitec Internet Services **
** Systems Adminstrator 14040 Arbor St. Suite 1 **
** email: lee@mitec.net Omaha, NE 68144 **
** http://www.mitec.net/ (402)330-9295 **
********************************************************/