RADIUS 2.0, Prefixing, and BSDi (fwd)

MegaZone (megazone@livingston.com)
Tue, 3 Dec 1996 20:05:23 -0800 (PST)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Ward Willats: "More on RADIUS packet lengths...."
Previous message: Andrew Silliker: "RADIUS 2.0, Prefixing, and BSDi"

Once upon a time Andrew Silliker shaped the electrons to say...
> ~> uname -a
> BSD/OS gold.interlog.com 2.1 BSDI BSD/OS 2.1 Kernel #0: Sun Sep 15 04:02:26 EDT 1996
> root@gold.interlog.com:/usr/src/sys/compile/INTERLOG i386
> ~> ./sources/BSDOS_2.0/builddbm
> ./sources/BSDOS_2.0/builddbm: Couldn't store datum for test
> ~> cat users
> test Auth-Type = System, Prefix = "P"
> Service-Type = Framed-User,
> Framed-Protcol = PPP,
> Framed-Routing = None,
> Framed-MTU = 1500,
> Framed-IP-Address = 192.168.0.1
> test Auth-Type = System, Prefix = "S"
> Service-Type = Framed-User,
> Framed-Protocol = SLIP,
> Framed-Routing = None,
> Framed-MTU = 1006,
> Framed-IP-Address = 192.168.0.1
> ~>
>
> Can one not prefix using a specific username, or does it
> have to be done via defaults? If it must be done via
> defaults, it would seem to be a significant drawback.

AFAIK it works on users as well as DEFAULTS.

I don't know what DBM isn't taking. I would try running it in non-DBM mode
to see if the settings work. Narrow it down.

-MZ

--
Livingston Enterprises - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 4464 Willow Road, Pleasanton, CA 94588

Next message: Ward Willats: "More on RADIUS packet lengths...."
Previous message: Andrew Silliker: "RADIUS 2.0, Prefixing, and BSDi"