I have "inherited" a problem with Radius 2.0. This may seem frufal
to some but with my limited knowledge It is big.
I need to set some script or program to extract info from the user
log for the purpose of billing. The person who set this up (no longer
available) left with the billing side of the project incomplete.
As I mentioned before, my knowledge is limited and I am not familiar
with perl. None-the-less I must get this working and put it down to
learning experience as I have quite a steep curve before me.
Currently the user log info looks like this.
Acct-session-id = "1C00000B"
User-Name = "pippee"
NAS-identifier = 203.63.173.2
NAS-Port = 13
NAS-Port-Type = Async
Acct-Status-Type = Start
Acct-Authentic = RADIUS
User-Service = Framed-User
Framed-Protocol = PPP
Framed-Address = 203.63.173.34
Acct-Delay-Time = 0
My task is to get it to look like this
date | Log on | Log off |12-7| 7-4 |4-12|Totaltime|Total$ |
and be able to email or print the bill.
I am able to pay a small sum for a script and consult but am very
constrained
Thank you for your time
Kevin
Kevin Waterson
surfnsun@nor.com.au
surfnsun@ozemail.com.au