Re: Radius 2.0 (fwd)
Robert J. Rhodes (robert@infi.net)
Mon, 13 Jan 1997 07:01:15 -0500
At 06:51 PM 1/12/97 -0800, MegaZone wrote:
>Once upon a time Brad Dean shaped the electrons to say...
>>downloaded the binaries and put then in the appropriate directories. I
>>started radiusd and set up the portmaster to use the Radius server. I
>>set the security on all the ports and reset them. I also did a save all.
>
>Did you set the shared secret on both ends? Is the NAS properly in the
>clients file?
>
>-MZ
>--
>Livingston Enterprises - Chair, Department of Interstitial Affairs
>Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
>For support requests: support@livingston.com <http://www.livingston.com/>
>Snail mail: 4464 Willow Road, Pleasanton, CA 94588
>
I just started experiencing the same problem described above. I have 5
different NAS's authenticating from this particular RADIUS 2.0 server and
they had been working fine. I verified the shared secret is properly set on
the NAS end and in the /etc/raddb/clients file on the server. Any other
suggestions?
Rob
********************************************************************
* Robert J. Rhodes (757) 624-2479 - Voice *
* Network Engineer (757) 625-2473 - FAX *
* InfiNet robert@infi.net - Email *
********************************************************************