Static IP routes (fwd)

MegaZone (megazone@livingston.com)
Thu, 23 Jan 1997 18:08:42 -0800 (PST)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Matthew N. Dodd: "Re: Serving >80000 users with RADIUS"
Previous message: MegaZone: "Static IP's with Multiple pm2's (fwd)"

Once upon a time Aaron Quarles shaped the electrons to say...
>that one PM 2E. Say for instance a dedicated remote ISDN customer gets
>disconnected and when they dial back in they connect to a different PM this
>customer has several IP networks routed to them, but if they don't dial
>back into they same PM the static routes are not there. Is there anyway to
>set this in Radius?

Use Framed-IP-Route to set the subnet/network routing to them.

I'd use ComOS 3.5 with VLSM and 'set user-netmask on'.

-MZ

--
Livingston Enterprises - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 4464 Willow Road, Pleasanton, CA 94588

Next message: Matthew N. Dodd: "Re: Serving >80000 users with RADIUS"
Previous message: MegaZone: "Static IP's with Multiple pm2's (fwd)"