Re: Routing

Luis E. Mu#oz (lem@TRUE.net)
Thu, 24 Apr 1997 11:28:09 -0400

sclarke@widow.aracnet.net wrote:
>
> Hello,
>
> Having little routing knowledge, I have a quick question.
>
> A customer of ours has his own class C and would like to connect to us/the
> Internet and have all his office machines on his class C. Using a
> Livingston Portmaster 2E, can I accomplish this by having him dial into
> one of the regular BRI ports on the ISDN module or do I need some sort of
> a router dedicated to him?
>
> Thanks,
>
> Steve
> AracNet

You can do this on async as well as on a BRI. Remember that these
connections use unnumbered links. What you would do is create an
entry in the RADIUS users database, setting the Framed-Address
to the IP address of the remote ethernet and the Framed-Netmask (sp?)
to 255.255.255.0. If the remote end is a Livingston too, the standard
config for this (in the docs) will work. On a Cisco, you would need to
use the `ip unnumbered' command on the interface.

Best regards.

-- 
(c)1997 Luis E. Mu#oz "El contenido | Luis E. Mu#oz
de   este   mensaje  no  puede  ser | Tel: +582 2392544
reproducido  en  forma  alguna, sin | Fax: +582 2397919
permiso expreso del autor"          | Email: lem@true.net