---- Start of excerpt ---------------------------------------
On Thu, 24 Apr 1997, Theo Van Dyne wrote:
> Run your make file from /usr/local/linux/ directory instead.
OK. I got a brand new tar of the Radius source. I untarred it ( the source
I was using before was messed up) and went to the Linux directory. Looking
at the makefile I'm not sure why you told me to make from
/usr/local/linux. It seems to be OK anywhere as long as you keep the
directory structure from the tar file intact. Anyway I went to the Linux
directory and typed "make". This is what I got:
make: *** No rule to make target `../radius/src/sdacmvls.h', needed by
`radiusd'. Stop.
This makes sense really because although there is a ../radius/src
directory, there is no file called sdacmvls.h.
I'm still not sure if I have to re-compile my radiusd in the first place.
We had another authentication failure last night, again with no funny
messages in /var/log/syslog, /var/log/messages, or anywhere in /etc/raddb.
I'm going to run radiusd -x tonight, hopefully (ha ha) we will have
another failure. I'm not quite sure what's the proper way to redirect
radiusd -x's output to a file. You might want to mention that in the next
Radius Administrator's manual. To answer your earlier questions, yes I did
the Troubleshooting in Appendix A. Oh yeah, thanks for the help so far!
------- End of Excerpt -------------------------------------------
This Radius problem is EXTREMELY frustrating, because it's been so rock
solid before. Also I've compiled tons of code before, but I don't know why
I can't compile this little Radius program!
_______________________________________________________________
/ /
/ Gary Swofford - Hampton Roads Online - Yorktown Virginia USA /
/ http://www.hroads.net /
/_______________________ gary@hroads.net_______________________/
On Tue, 29 Apr 1997, Ed Manaman wrote:
> Interesting. So hopefully we are not doing something wrong. Some more
> details, if they are of interest is,
>
> We don't use builddbm
> 1.6 runs just fine
> I also have a ticket # now
>
>
> I wonder if it is just radius 2.0 for Linux. Why doesn't 2.0 come with
> the scripts such as addppp? Did I miss something.
>
> Are you running shadow passwords?
>
> If you want, send me the source, as I've only got the pre-compiled
> version. What compile errors are you getting? I can probably compile it.
>
>
> Ed
>
> -------------------------------------------
> | e-mail: elongstr@spectra.net |
> | WWW: http://www.spectra.net/~elongstr |
> | Voice: 607-798-7300 |
> | Fax: 607-798-8305 |
> | Data: |
> -------------------------------------------
>
>
> On Tue, 29 Apr 1997, Gary wrote:
>
> > On Tue, 29 Apr 1997, Ed Manaman wrote:
> >
> > > Hello,
> > >
> > > We've just upgraded to radius 2.0. We tested with a small group of users
> > > before putting it into place with our 2,000+ users file.
> > >
> > > Now that it's in full swing, we have the following problem:
> > > About every .5-2 hours radius just stops authenticating.
> >
> > We have Linux 2.0.30 and we have the same problem! It takes 1 to 5 days
> > for our authentication to stop. I opened a ticket (number 035958) four
> > days ago with Livingston, but they have been strangely silent on this. I
> > have tried to compile the Radius 2.0 source, but I'm having trouble with
> > that also (Livingston also knows about this).
> >
> > > The first time it happened radius said:
> > > radius[96]: sending SIGHUP signal to unresponsive child process 1944
> > >
> > > Now we get nothing, no messages, and it just quits, and leaves 1 radius
> > > process running, but not doing authentication.
> > >
> > > We were using 1.6 with absolutely no problems.
> >
> > Sorry I don't have a solution for you, but at least you're not alone!
> > _______________________________________________________________
> > / /
> > / Gary Swofford - Hampton Roads Online - Yorktown Virginia USA /
> > / http://www.hroads.net /
> > /_______________________ gary@hroads.net_______________________/
> >
> >
>