Thanks for all the responses so far!
Noel Dear wrote:
> I am new at this, so pardon me if this is a dumb question or if it has
> been recently
> discussed.
>
> I am attempting to use Radius NT 2.0 to manage authentication for a
> start-up ISP.
> I installed the software on my radius server and ran it. Nothing
> appeared to happen
> at all on the screen. There were no entries pertaining to radius
listed
>
> under services in
> the control panel. The only hint that anything happened was
radsvc.exe
> was listed under processes in the task manager.
>
> I loaded it on my back-up server and everything worked great. I
thought
>
> my first
> server might have a problem, so I loaded Radius on a third server and
> got the same
> problem I had to begin with.
>
> Other info that might be helpful:
> I used the same user account to install and run radius on each
machine.
> The server that ran radius correctly was the primary domain controler.
> The two servers that didn't work are working across the network in
every
>
> other aspect.
> I tried installing radius on both fat and ntsf partitions, it didn't
> show up either way.
> ???
>
> Any clues?
>
> Noel Dear
> noel@explorecom.net
>
-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-radius' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>