(RADIUS) Call-Check with ComOS 3.8b15

Brent Foster (fostbt@one.net)
Fri, 24 Apr 1998 01:09:09 +0000 ( )

We just installed ComOS 3.8b15 on our PM3's and were trying to test the
call-check feature that was just released. I'd like to be able to
block a specific phone number from calling, and allow everyone else to
dial in.

Here's what we did:

We added:
VALUE Service-Type Call-Check-User 129
to the Radius Dictionary file.

We did a 'set call-check on' to all of the Portmasters.

Then we added the following to the top of our Radius users file:

phone# Service-Type = Call-Check, Calling-Station-Id = phone#, Auth-Type = Reject

DEFAULT Service-Type = Call-Check, Auth-Type = Accept

That didn't seem to do the trick. I did manage to reject all incoming
calls though :)

Radius logs gave me this:

access-request from sv53.access.one.net (207.78.244.70) denied for unknown user 513683xxxx
user_find: unable to parse check-items for user 513683xxxx
(replace the x with the number)

Any help or suggestions would be greatly appreciated.

Regards,
Brent Foster

-- 
Brent Foster
Lead Systems Engineer
OneNet Communications, Inc
513.554.1NET - brent@one.net




-
To unsubscribe, email 'majordomo@livingston.com' with
'unsubscribe portmaster-radius' in the body of the message.
Searchable list archive: <URL:http://www.livingston.com/Tech/archive/>