Radius and the "UNIX" password...

David Jirku (djirku@echo-on.net)
Wed, 6 Sep 1995 20:51:48 -0400 (EDT)

Hi there, just a quick question. We've got a PM2e (30 ports), which has
been working great (when the power plug doesn't work itself out of the
back :). We've also got Radius up and running (bsdi 2.0 btw), no
problems, except for this one: When we put the "UNIX" for the password,
wanting Radius to check the /etc/passwd file, it always comes back with
an invalid login. Putting the actual password in works, and the DEFAULT
user at the end of our /etc/raddb/users file (which just rlogin's to a
shell account) work. The question is, what is wrong with our Radius?
Here's my entry for PPP from the users file, (note: the fact that I have
a static (not dynamic) IP address doesn't make a difference).

Pdjirku Password = "UNIX"
User-Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-Address = 205.206.80.13,
Framed-Netmask = 255.255.255.0,
Framed-Routing = None,
Framed-MTU = 1500

Any ideas? Any, and all help will be greatly appriciated!

------------------------------------------------------------------------------
David Jirku | http://www.echo-on.net/~djirku | Echo Online Asst. Sys. Admin.
------------------------------------------------------------------------------