[snip]
> If you have 30 ports setup for network and set assigned to 192.10.20.1 it
> will got up to 192.10.20.30 and then loop back to 192.10.20.1.
>
> Now, we do have a minor bug so that if the PM is fully loaded and someone
> hangs up and another user dials in *immediately* the routing table won't have
> timed out, so the PM may go to .31. We've had rare reports of some PMs that
> are really being beat on pushed to .32.
>
> We know about this and it is being worked on.
>
Ahh...I was just about to ask about this! I had one go to .32 today,
on a PM2eR-30. Interesting thing is that I'm not even using the top ten
ports, since they don't work! (Bad out of the box, and this is my
replacement unit for an RMA on the WAN port, pre-May-15-type-thing.)
So why should it ever get up to .31, even?
> Now, if you ever have it go beyound that, something is very wrong. To date
> I have never seen a report of that kind of action. And we have an extremely
> large user base doing assigned IPs.
>
------------------------------------------------------------------------
David Carmean WB6YZM DC574 dave@west.net
WestNet Communications, Inc. (805)892-2133 (805)289-1000
PGP Key Fingerprint: CD 1C C1 15 3E E3 1D 41 ED C2 3E A8 D6 29 BD C4
------------------------------------------------------------------------