Re: Adtran async/sync DSU 5600 with PM's
Jon Lusky (lusky@edge.edge.net)
Wed, 27 Sep 1995 16:11:33 -0500 (CDT)
Matthew S. Crocker writes:
>
> Get two async/sync Adtran CSU/DSU's and put them on each end of the 56k.
> Attach them to ASYNCH ports on the PM's. Setup the PM for direct
> connection network with a static IP address using PPP. Set the remote PM
> to use that ip address for its default route. (ie setup all routing on
> the PM to go through the IP address)
That works fine... I'm doing PM2E to Linux pppd-2.1.2x with Adtran DSU III's
over a 56k DDS with no problems. Asynch conversion works great, you just
have to be using async conversion on both ends--can't run sync on one side
and async on the other.
--
Jonathan R. Lusky | lusky@edge.net
http://www.hotrod.com |
------------------------|----------------
Edge Internet Services | (615) 726-8700