OK, yet another silly question. We're running a Portmaster and BSDI, and
have the portmaster set to the following:
----------------------- Current Status - Port S21 ---------------------------
Status: ESTABLISHED
Input: 9840560 Parity Errors: 0
Output: 73080414 Framing Errors: 0
Pending: 0 Overrun Errors: 0
Modem Status: DCD+ CTS+
Active Configuration Default Configuration
-------------------- ---------------------
Port Type: Netwrk Login/Netwrk (Dial In)
Baud Rates: 57600 57600,57600,57600
Flow Control: RTS/CTS RTS/CTS
Modem Control: on on
Modem Config: Configured gvc
Remote Host: pm1-13.netinc.ca
Netmask: 255.255.255.255 0.0.0.0
Interface: ptp21 (PPP,Quiet) (SLIP,Quiet)
Mtu: 256 1500
Async Map: L:00000000 R:00000000 00000000
Pkt Filters: In:std.ppp.in Out:std.ppp.out
Login Message: NETWORK ENTERPRISE TECHNOLOGY INC.^Thank you for calling.
Dial Group: 0
We have our main shell machine set up as the default host, and if a person
logs into the pm with (win95 examples here) hyperterm, they get
automatically "rloginned" to that machine, and use shell to their heart's
content. If they dial in with dialup networking, they authenticate using
PAP, and go on their merry web-way. No Puser, no Suser (lots of Lusers tho'
;-) ), everyone seems happy. Did I just hit on a magical solution, or am I
in the dark on some big problem with doing things that way?
Rob
--------------------------------------
Cheaper Faster Better --- Pick Any Two
--------------------------------------
Robert Hof rhof@netinc.ca
Network Enterprise Technology Inc.
(905) 525-4555 http://www.netinc.ca