Re: Multiple BRI's on a BRI-5?

alex (alex@agetech.net)
Tue, 11 Jun 1996 12:09:46 -0400

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: John Leonard: "PM2E30/BR5 delays hangup using v.120"
Previous message: H.Shimizu: "Where is old version comos?"
Maybe in reply to: Joe Hartley: "Multiple BRI's on a BRI-5?"
Next in thread: Joe Sasek: "Re: Multiple BRI's on a BRI-5?"

Bruce Byrd wrote:
>
> Yes. You can bond 4 B channels together. In fact, you can use MP to
> bond all 30 B channels together if you had (3) 5BRI cards installed!
>
> Bruce
>
> At 6:32 AM 6/11/96, Joe Hartley wrote:
> >Does the 5-BRI board support the bonding of multiple BRI circuits for
> >greater bandwidth? That is, can I offer a customer 256K bandwidth by
> >bonding 2 BRI circuits (4 B channels) together?
> >
> >Thanks.
> >
> >==========================================================================
> > Joe Hartley - jh@brainiac.com - brainiac services, inc
> > PO Box 5069 : Greene, RI : 02827 - vox 401.539.9050 : fax 401.539.2070
> >Without deviation from the norm, "progress" is not possible. - Frank Zappa
>
> _______________________________________________________________
>
> Bruce Byrd
> Director of Marketing
> Livingston Enterprises
> Pleasanton, CA (510) 485-6788

Hmmmm.I thought I heard someone mention you HAVE to have atleast one card with 10 asynch port, unless the
new pm2e with the bri built in can take all isnd?

Next message: John Leonard: "PM2E30/BR5 delays hangup using v.120"
Previous message: H.Shimizu: "Where is old version comos?"
Maybe in reply to: Joe Hartley: "Multiple BRI's on a BRI-5?"
Next in thread: Joe Sasek: "Re: Multiple BRI's on a BRI-5?"