Re: Multiple BRI's on a BRI-5?
Joe Sasek (sasek@livingston.com)
Tue, 11 Jun 1996 09:30:51 -0700 (PDT)
>Bruce Byrd wrote:
>>
>> Yes. You can bond 4 B channels together. In fact, you can use MP to
>> bond all 30 B channels together if you had (3) 5BRI cards installed!
>>
>> Bruce
>>
>> At 6:32 AM 6/11/96, Joe Hartley wrote:
>> >Does the 5-BRI board support the bonding of multiple BRI circuits for
>> >greater bandwidth? That is, can I offer a customer 256K bandwidth by
>> >bonding 2 BRI circuits (4 B channels) together?
>> >
>> >Thanks.
>> >
>> >==========================================================================
>> > Joe Hartley - jh@brainiac.com - brainiac services, inc
>> > PO Box 5069 : Greene, RI : 02827 - vox 401.539.9050 : fax 401.539.2070
>> >Without deviation from the norm, "progress" is not possible. - Frank Zappa
>>
>> _______________________________________________________________
>>
>> Bruce Byrd
>> Director of Marketing
>> Livingston Enterprises
>> Pleasanton, CA (510) 485-6788
>
>
>Hmmmm.I thought I heard someone mention you HAVE to have atleast one card
with 10 asynch port, unless the
>new pm2e with the bri built in can take all isnd?
The Portmaster can now be purchased with either a 10 Async port base, or a 5
BRI base so that you can have up to 15 BRI in a single box.
Joe
___________________________________________________________
Livingston Enterprises 6920 Koll Ctr Parkway #220
Joe Sasek Pleasanton, CA 94566
V.P of Sales & Marketing http://www.livingston.com/
(510)426-0770 (Voice) (510) 426-8951 (Fax)
___________________________________________________________