On 5 Jun 96 at 14:02, Andy Doolittle wrote:
> On Wed, 5 Jun 1996, Lucien Murray-Pitts wrote:
>
> >
> > I basically DON'T want to run a telnet to a portmaster but want to use
> > the same method as the PMConsole program does - does ANYONE know how to
> > do this?
> >
> > I know its UDP, but what is the protocol... ... I want to start simple
> > say just resetting ports... etc
> >
> >
> > Lucien
> >
> Well, sorry but it's ours and you can't have it 8-) Seriously, we have
> been asked and at this point have no intention of distributing the
> protocol. Sorry.
>
> How'd you figure the UDP part?
>
Hey guys, you're tough, now? Get your etherfind or similar tool and
trace the packets between pmcommand and the PM on the known UDP
ports... ;-) Didn't some guys do adb on pm2_3.x.x images to find out
some new commands? Or check the Boot-EPROM in the units for the boot
monitor? ;->
Frank
-- ***** The expressed opinions are totally mine! ***** Frank M. Heinzius MMS Communication GmbH frimp@mms.de Eiffestrasse 598 http://www.mms.de 20537 Hamburg, Germany Phone: +49 40 211105-0 Fax: +49 40 210 32 210 ***** U.S.Robotics and Livingston Distributor *****