Continuous Dial-Out Location problem (fwd)
MegaZone (megazone@livingston.com)
Thu, 13 Jun 1996 14:10:13 -0700 (PDT)
Once upon a time scharnay@empnet.com shaped the electrons to say...
>I have a PM-2E-30 used for PPP users and would like to configure one of the
>ports to dial-out to a specific location to a 28.8 network connection. I am
>running Radius and would like to give this location an assigned IP.
>
>What's the best way to do this considering the following things.
>#1 THe Phone line hunt group comming into the PM-2E-30 are incoming lines only
>I would like to only make one line outgoing and incoming
>#2 The user wants an assigned IP
>#3 The connection has to be continious.
You have one choice for a dialout network connection - you need to use
the location table capbility of the PM. Look in the Config Guide for
dialout connections, it should address all of your points.
-MZ
--
Livingston Enterprises - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
For support requests: support@livingston.com <http://www.livingston.com/>
Snail mail: 6920 Koll Center Parkway #220, Pleasanton, CA 94566