On 9 Jun 96 at 10:31, Leo Savage wrote:
> On Sun, 9 Jun 1996, MegaZone wrote:
>
> > The PM only sends the string on boot and when manually resetting a port,
> > not after every call.
>
> Oof. It should reset the modem after every call. Lord only knows what
> crap got sent to the modem in command mode between the time the caller
> disconnected and the time you noticed CD drop. What if he was reading
> Carl's message about modem setup strings?
Why not attach to the modem, configure it, save settings to NVRAM
(AT&W) and program the modem to reset on DTR drop (e.g. ATS13=1 with
USR Courier).
The PM drops DTR to end connections or to reset modems. Forget the
modem table. Do it the DTR way - and the modems gets initialized to
your programmed settings after each call. Works like a charm...
Frank
-- ***** The expressed opinions are totally mine! ***** Frank M. Heinzius MMS Communication GmbH frimp@mms.de Eiffestrasse 598 http://www.mms.de 20537 Hamburg, Germany Phone: +49 40 211105-0 Fax: +49 40 210 32 210 ***** U.S.Robotics and Livingston Distributor *****