I have the following in my /etc/raddb/users file/..
dialback Password = "dialback"
User-Service-Type = Dialback-Login-User,
Login-Host = 0.0.0.0,
Dialback-No = "9,958-9433",
Login-Service = Telnet,
Login-TCP-Port = 23
This is what happens when I call in with a terminal program....
CONNECT 19200
Welcome to ICENTER.NET
login: dialback
Password:
Dialback Accepted
NO CARRIER
Then... NOTHING! It doesnt dialback. I've watched the suspect modem and after it hangs up
on dialback, there is NO activity on the modem, no signs of dialing out, or anything...
However, when I do a pmwho, the username dialback remains at PASSWORD for aprox 60 seconds...
Should a port be configured differently for the ability to dial out for dialback security?
I have the porttype set to Network/Login,
The login service as Portmaster,
Modem control on,
Baudrate 115200
I've set network to both Dialin, Dialout, Dialin&Dialout..
None of these seem to of made any difference..
The only thing I can think of, because this did work ONCE before a month ago, is that
I've upgraded the COMOS to Livingston Enterprises PortMaster Version 3.3.1c1
Any suggestions?