I am also having this problem. I've yet to call Hayes about it, but have
found for some odd reason, that a hard reset seems to cure it for awhile.
If you find anything out about this, please let me know. Reseting the port
on the PM also does not fix it for me.
>Also, the modems that do work.. I only get a maximun connection speed of
>26400 bps.
It's funny you should say that, cause for the most part, all I get, are
connect 48800. Weird, but the throughput seems to be a good 28800 connect.
I think if you check, you'll find this as well.
>Any tips here?? :)
For the most part a hard reset seems to work for a day or so, then back
again to OH. On a side note, I've also had them stay "connected" to
nothing, again tying up a line.
>This is the definition that I have on the modems:
Here is ours:
pm1> sh modem hayesr
Short Name: hayesr
Long Name: Hayes Century Rack
Optimal Speed: 115200
Type: User Defined
Init Script: Send Command Wait for Reply
------------------------------ -----------------------------
AT&F&C1&D2&Q5&K3S0=1&S2E0Q0V1\r OK
Dave...
_\\|//_
(-0-0-)
/----------------------------------ooO-(_)-Ooo-------------------------------\
| Dave Berzins, President Nucleus Inc. 1835B 10 Ave S.W. Calgary, AB, T3C 0K2|
| 403-541-9470 Voice, 403-541-9400 Modem, 403-541-9474 Fax |
|email:berzins@nucleus.com www: http://www.nucleus.com finger:nis.nucleus.com|
\----------------------------------------------------------------------------/
|| ||
ooO Ooo