subnet a class c (fwd)

MegaZone (megazone@livingston.com)
Wed, 19 Jun 1996 18:24:44 -0700 (PDT)

Once upon a time Moises Rivas shaped the electrons to say...
>1.- If I have a subnetted class C, with 255.255.255.224 netmask, can I use the
>8 subnets????. For example if I have the network 200.x.100.0 and the netmask i

Yes, with out equipment you can use all subnets. All of the modern equipment
I know of allows the use of all subnets.

>If I use the 8 (6) subnets for 8 (6) Portmaster PMe30, I use 30 address for th
>30 asynchronous ports (Assigned in Global Par) and what about the ether0 port?
>2.- I have 2 class C; X.X.1.0 and X.X.2.0, can I use on a PMe30 the address X.X.1.1
>for the ether0 and the address X.X.2.1 for the assigned IP pool. In other words, can I
>use different "network" address for the ethernet port and the asyncronous ports.

Yes. But then you need to use the Netmask table since you are doing non
contiguous subnetting.

-MZ

--
Livingston Enterprises - Chair, Department of Interstitial Affairs
Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
For support requests: support@livingston.com  <http://www.livingston.com/> 
Snail mail: 6920 Koll Center Parkway  #220, Pleasanton, CA 94566