Re: 5BRI (fwd)

Jason Hodges (jason@sprint.com.au)
Thu, 20 Jun 1996 13:02:20 +1000 (EST)

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Armando Escalante: "Re: ComOS 3.3 reboot problems (fwd)"
Previous message: Patrick C. Wolf: "Re: PPP & Shell user (fwd)"
In reply to: MegaZone: "5BRI (fwd)"
Next in thread: MegaZone: "Re: 5BRI (fwd)"

Are they available for the Australia ISDN network? We just bought a pm2er
not long ago but the vendor here tells us they will not be available for
the ISDN Network here. Something about them only supporting a new ESDI
standard? We need an ISDN access server really soon and dont want to have
to spend $16k or so on a cisco 4500..

Jason Hodges

On Wed, 19 Jun 1996, MegaZone wrote:

> Once upon a time Support shaped the electrons to say...
> >The 5 BRI for the 2ER will work in the 2E but not the other way around?????
> >Is this correct?
>
> Yes. Rev C and above work in both. A & B are 2E only.
>
> -MZ
> --
> Livingston Enterprises - Chair, Department of Interstitial Affairs
> Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
> For support requests: support@livingston.com <http://www.livingston.com/>
> Snail mail: 6920 Koll Center Parkway #220, Pleasanton, CA 94566
>

Next message: Armando Escalante: "Re: ComOS 3.3 reboot problems (fwd)"
Previous message: Patrick C. Wolf: "Re: PPP & Shell user (fwd)"
In reply to: MegaZone: "5BRI (fwd)"
Next in thread: MegaZone: "Re: 5BRI (fwd)"