ISDN DEBUG - ADAK ISDN router

Rick Wagner (rick@foothill.net)
Thu, 20 Jun 1996 09:31:20 -0700

My customer is using an ADAK router to try and connect to my ISDN port on a
PM2e with a 5 Bri Mod card. I set console set debug 0x51 set debug isdn on
and this is the relevant capture. It apppears to me that I am sending a
request to disconnect immediately.

S10: Sending Request Connect - 64Kbps / Data
S10: Received Connect - B1
S10: Sending Disconnect Request
S10: Received Disconnect Ack
S10: Received Call Clear

The customer reports that he is getting error messages about unknown
compression and ... here is a copy of his log

>>
>>Connect
>>WARNING: Unrecognized response. Retrying....
>>Connection established at 57600bps
>
>57.6? That is an async line speed, for ISDN I expect 64 or 56. Weird.
>
>>Error-control off or unknown.
>>Data comression off or unknown.
>>Remote modem hung up.
>>NO CARRIER
>>ADAK 221 closed.
>
rick
~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Thank You Voice:(916)367-3818
Rick Wagner Fax:(916)367-4140
rick@foothill.net Modem:(916)367-4790