Re: idletime setting no working at all

Jason Hatch (zone@loomis.berkshire.net)
Fri, 21 Jun 1996 06:39:53 -0400 (EDT)

I have a problem with this, too on my pm2e's. It pretty much ignores the
IDLE time we set.

-Jason

On Fri, 21 Jun 1996, Christophe Prevotaux wrote:

> I have a portmaster 2E10 with 20 ports
> and when I set IDLETIME to 3 or 240 or any other value
> it just sets the idletime to 3mins or so ...
> I use 3.1.4 ComOS
>
> How can i make it respect the set idletime ?
> --
> =====================================================================
> Christophe Prevotaux | EBCnet, Reims, France
> IRC: nighty | Internet Services Provider
> Email: nighty@ebc.net | Champagne-Ardenne Region
> www:http://www.ebc.net | tel: + 33 26 49 99 00
> =====================================================================
> Sysadmin EBCnet/Internet Systems Engineer | Unix ? What is it ?
> =====================================================================
> == My opinions do not reflect those of my employer ==
> =====================================================================
>
>