and a coupla other things in win95 setup... YMMV and if you need help...
ill do my best...
--->
Robert H. Hanson LAN/WAN Consultant - Internet Service Provider
Otis Orchards, Wa. Cutting Edge Communications www.cet.com
(509) 927-9541 finger: info@cet.com or email: roberth@cet.com
On Sat, 22 Jun 1996, Helio Coelho Jr. - CompuLand Informatica wrote:
> >At 09:41 PM 6/21/96 -0300, Helio Coelho Jr. - CompuLand Informatica wrote:
> >>Hi:
> >>
> >> I'm using a PM2er30 to connect my dial-in users. I have one ftp server
> >on the
> >>same cable, in a hub. It has a fast ethernet board, and is a fast machine.
> >>But the
> >>ftp rates that the dial in users are getting are very small. :(. I tested
> >>that in a moment of very few traffic. I logged on, dialling, and was dang
> >>slow (about 0.8 kb/s !). I'm using PPP. I don't know what can be the
> >>problem. The problem appeared from nothing: everything was just fine. The
> >>only thing I've done is the upgrade to the last ComOs, but I think there's
> >>no relation with that.
> >>
> >> Any help would be greatly appreciated!
> >>
> >>thanks!
> >>Helio.
> >>
> >>
> >
> >Would you happen to be using a Sparc Station? Running Solaris 2.5??? (or a
> >PC running x86 solaris 2.5)
> >
>
> No it isn't. It's a Freebsd box. Today I've done some testing and seems to
> be a Win95 problem. I tried Tcpman (trumpet) stack and got normal figures
> (about 3k/s with a 28800 modem). Does anyone had problem with Win95 Dial Up
> connecting to a PM ? I got some users (that are using Win95) complaining of
> the same problem.
>
> Thanks!
> Helio.
>