Re: Telnet Problem (fwd)
Bill Griffin (bgriffin@coax.net)
Wed, 26 Jun 1996 20:53:17 -0400
At 02:29 AM 6/24/96 -0700, you wrote:
>Once upon a time Bill Griffin shaped the electrons to say...
>>I have a couple of connection problems to my Portmaster 2E30. Right now I am
>>unable to Telnet to the Portmaster. I am able to access it through
>>PMCONSOLE. However, when I try to view Netstats, PMCONSOLE terminates; then
>>I am unable to get to the Portmaster by any means except via a hardwired
>>terminal. I then rebooted the Portmaster and PMCONSOLE access comes back,
>>but I still am unable to Telnet to it. Any suggestions? TIA.
>
>Could you have set the telnet port to something other than 23?
>
No, Telnet it's still set on Port 23 as viewed via PMCONSOLE general
configuration data. I do have a USR Total Control System running on the same
class C netmask. Both seem to run fine except for this difficulty. Any other
ideas?
Bill G.
>-MZ
>--
>Livingston Enterprises - Chair, Department of Interstitial Affairs
>Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com
>For support requests: support@livingston.com <http://www.livingston.com/>
>Snail mail: 6920 Koll Center Parkway #220, Pleasanton, CA 94566
>