> I have just upgraded 2 PortMaster PM-2's to version 3.3.1c1;
> one works fine, and one will not talk to anyone successfully
> over the serial ports (but pmconsole, and telnet to it work fine).
>
> Problem 1) User is coming in, modems appear to negotiate a 28800
> session, but as soon as PPP starts, he is disconnected. The 'auth'
> syslog shows:
>
> pm1 dialnet: port S2 xxxxx succeeded dest 199.71.60.1
> pm1 dialnet: port S2 ppp_sync failed dest 199.71.60.1
> pm1 S2: Session Terminated - NAS Error - PPP Unknown State
>
> He could connect until the upgrade was installed.
Is this happening to more than one user?
>
>
> Problem 2) User is being refused RADIUS authentication, only since
> upgrade was installed. The 'auth' syslog shows:
>
> pm1 dialnet: port S0 yyyyyy@zzz login failed
> pm1 portmaster: port S0 session disconnected user yyyyyy@zzz
>
> and the 'radiusd' logfile shows:
>
> rad_authenticate: 7/78 'yyyyyy@zzz' at pm1 dumb
> Authentication: 7/78 'yyyyyy@zzz' via pm1 from pm1 0 dumb -
> FAILED Authentication failure
>
> (We are using Merit RADIUS, and passing @zzz to a remote server).
Is this happening to more than one user? Have you checked the logs on the
remote server?
Mike
________________________________________________________________
Mike Ossmann NetPlus+, a service of Page Plus+
mike@pageplus.com http://www.pageplus.com
fax: 970-493-8717 voice: 970-484-1933 or: 1-800-279-1933
________________________________________________________________