Re: Ascend P130 <--> 5 BRI (fwd)

Howard Leadmon (howardl@abs.net)
Sat, 7 Sep 1996 01:24:04 -0400 (EDT)

> There is nothing special to get two channels up. Make sure he is using
> RFC 1717 MP, not Ascend's MP+, and the user entry is the same. Just
> make sure you don't have Port-Limit = 1.
>
> -MZ

Do you know if Livingston has any intention of supporting MP+ ??

I know that Ascent placed the extensions in the public domain, and the
enhancements to the spec are quite nice. On top of that it would make
the Livingston products much more compatible with any Pipelines out there
on the market, which you have to admit a lot are in use. Heck this is
coming to you via my P-75 which is connection to a 5BRI adapter. If the
MP+ was present it would be able to dynamically allocate more capacity
if needed..

-------------------------------------------------------------------------------
Internet : howardl@abs.net | Howard D. Leadmon
UUCP : wb3ffv!howardl | ABSnet Internet Services
PHONE : (410)-361-8160 | 200 E. Lexington Street
FAX : (410)-361-8162 | Suite-1602
PACKET : WB3FFV @ WB3FFV.MD.USA.NA | Baltimore, MD 21202
WWW : http://www.abs.net |