Routing to network

Demetris Papallis (demetris@cylink.net)
Tue, 17 Sep 1996 17:19:36 +0300 (EET DST)

Hi,
I have a customer that attempts to connect his network through us. He
is using a BSDI box as a gateway. The BSDI IP is 194.43.129.90 His network is
194.43.130.x He connects fine using a dialup PPP connection to our PM2, and he
is able to see outside addresses from his BSDI. However, from the workstations
connected to his gateway, the only hosts able to be resolved are the ones
present inside my 194.43.129.0 network. He says, that when tracerouting to
anything outside mine or his network, tracerouting stops at the PM and from
then on he gets an ICMP error.

The users entry I'm using for him is:

coretest Password = "Passwd"
Service-Type = Framed,
Framed-Protocol = PPP,
Framed-IP-Address = 194.43.129.90,
Framed-IP-Netmask = 255.255.255.0,
Framed-Routing = "Broadcast-Listen",
Framed-Route = "194.43.130.0 194.43.129.90 1"
Filter-Id = "std.user",
Framed-MTU = 1500

Is my users entry wrong?? Is there something else that I'm overlooking, and
that would cause the ICMP error??

Thanks,
demetris

======= ___ === === Demetris Papallis,System Administrator
====== / / / ___ ____ _/_ ==== Cylink Ltd. / EUnet Cyprus
===== /--- / / / / /___/ / ===== 504 Augousta House, 10 Stassandrou str.
==== /___ /___/ / / /___ /_ ====== Nicosia 1660, Cyprus
=== ======= demetris@cylink.net
== ==== ==== ======== http://www.Cyprus.EU.net