control panel/modems/ look at modem driver/
is it the right one?
what port and speed?
then
control panel/system/dev mgr/ports (com and lpt)/whatever port/port
settings/
set bits per second and "hardware flow control"
--->
Robert H. Hanson LAN/WAN Consultant - Internet Service Provider
Otis Orchards, Wa. Cutting Edge Communications www.cet.com
(509) 927-9541 finger: info@cet.com or email: roberth@cet.com
On Fri, 20 Sep 1996, Demetris Papallis wrote:
> >
> > Another item to check is to make sure that NETBUI and IPX protocols are
> > disabled ... You should only have TCP/IP protocol active in the dialup
> > connection ( otherwise the other two protocols will reake havoc <grin>
> > ).
> >
> > TTYL ... GM
> >
>
> Nope, his config is correct. He only has TCP/IP enabled....
>
> d.
>
>
>
> ======= ___ === === Demetris Papallis,System Administrator
> ====== / / / ___ ____ _/_ ==== Cylink Ltd.. / EUnet Cyprus
> ===== /--- / / / / /___/ / ===== 504 Augousta House, 10 Stassandrou str.
> ==== /___ /___/ / / /___ /_ ====== Nicosia 1660, Cyprus
> === ======= demetris@cylink.net
> == ==== ==== ======== http://www.cylink.net
>