RADIUS does this flawlessly all the time - everytime I dialin to Livingston
from home my IP is static *and* I have a few extra sent with Framed-Route.
So I know this works without a hiccup with a standard install. It is also
*extremely* common with our customers.
>> 2. I believe it is 'set user username port 1' to set the port limit
>> to 1.
>apm2> set user Ptest port 1
>Unknown Netuser parameter: 1
Right, like I said 'I believe' - which is why I said it was in the 3.3.1
release notes since I wasn't sure. It is:
---cut---
Per user port limit (for Multilink PPP and Multilink V.120)
Maximum number of ports can be set on a per user basis within a single
PortMaster. If left unconfigured, port limits will not be imposed. If
a port limit is set, the user will be limited to that maximum number
of ports on the PortMaster for Multilink V.120 and Multilink PPP
sessions. This feature can be used to restrict which users can have
service greater than 64 Kbps. Per user port limits can be set for user
profiles residing in either the local user table, or via RADIUS.
1) For the user table (stored locally in the PortMaster), the following
command is used:
Command> set user username maxports number
Examples-
Command> set user jsmith maxports 2
Command> set user tjones maxports 1
2) For RADIUS, the Port-Limit attribute has been added to the user profile.
---cut---
>file via the UNIX password database. I can just add the line to
>this stanza, right? I believe we had problems with things like this
>before.
Yes.
-MZ
-- Livingston Enterprises - Chair, Department of Interstitial Affairs Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com For support requests: support@livingston.com <http://www.livingston.com/> Snail mail: 6920 Koll Center Parkway #220, Pleasanton, CA 94566 See me in person: Internet Expo, Boston, MA, October 16-17, Booth 422 ;-)