Re: Unknown Debugging Message???

Demetris Papallis (demetris@cylink.net)
Sat, 21 Sep 1996 10:32:31 +0300 (EET DST)

> That bit of info is a Great HELP! Are you using Radius for authentication? If
> so make sure you have his authentication record setup properly - in other words,
> make sure the Radius record reflects PPP operation with PAP authetication ( damn,
> wish I was at the ISP site so I could get you a configuration record for an example!
> ).

Yes, I'm using Radius for authentication and at least up to now I never had a problem
with authentication. This particular users' entry is as follows:

user Password = "passwd", Simultaneous-Use = 1
Service-Type = Framed,
Framed-Protocol = PPP,
Framed-IP-Netmask = 255.255.255.255,
Framed-Routing = None,
Filter-Id = "std.user",
Framed-MTU = 1500

Works for everybody else!

> One other thought comes to mind ... What is the version of the software in the
> Portmaster? We had a problem with our Portmaster and Windows-95 until we upgraded
> to the latest revision!

3.3.2c1 is the name :) The latest one...

thx,
dp

======= ___ === === Demetris Papallis,System Administrator
====== / / / ___ ____ _/_ ==== Cylink Ltd. / EUnet Cyprus
===== /--- / / / / /___/ / ===== 504 Augousta House, 10 Stassandrou str.
==== /___ /___/ / / /___ /_ ====== Nicosia 1660, Cyprus
=== ======= demetris@cylink.net
== ==== ==== ======== http://www.cylink.net