> On Thu, 26 Sep 1996, John G. Thompson wrote:
>
> > On Thu, 26 Sep 1996 patrick@value.net wrote:
> > >
> > > Is there a way to disable the BRI ports on a OR-U? A customer is using an
> > > external unit on the S0 port and is worried about the flashing
> > > light(really!)
> > >
> > > Just trying to make him happy.....
> >
> > Zero out the spid and directory number. I think you can also
> > set the isdn switch type to null. A reboot after saving those
> > changes should take care of things.
> >
> > Command> set s<n> spid <CR>
> > Command> set s<n> dn <CR>
> > Command> set isdn-switch <CR>
>
> Thanks for the response.
>
> It will not take a null entry for the switch though.
Okay. Try setting spid and dn to zero (0).
JGT
-- John G. Thompson Livingston Enterprises Inc. Phone: (800) 458-9966 JOAT(MON) 6920-220 Koll Centre Pkwy. Fax: (510) 426-8951 support@livingston.com Pleasanton, CA 94566 http://www.livingston.com