Oh?????
How about...
1. Default routing entries are not displayed,
2. The Edit cut and paste is not functional (published), although
ctrl-C and ctrl-V do work,
3. Editing host tables causes a PMconsole GPF (and loss of Windows
Resources) when the host table exceeds 982 bytes (approx
43 host entries),
4. Host table allows complete duplicate entries, duplicate IP's,
and/or duplicate names (with different IP's),
5. Following an "upgrade", spuradically will receive an error
window mentioning something about 'cannot write to AUX port',
6. No checking for configuration version change problems that
we are now all becoming somewhat sensitive to even though the
information to do so is available to PMconsole,
7. The greater the amount of traffic moving through a PM2 when
doing an "upgrade" from PMconsole, the higher the probability
of corruption following a reboot,
8. When editing serial port values, the number of data bits does
not appear on the screen, and apparently cannot be changed
without telneting to the box or using a directly connected
console port to edit the value from the PM2 command line.
9. etc...
All of these have been seen from multiple WFW 3.11 machines
configured in several different ways, and are otherwise very
stable PC's.
Rich
adar0@routers.com