Acct-Session-Id of all 0's means it is the packet sent to signal a boot
(Start) or about to reboot (Stop). It is a special case.
>-Robert
>
>
>Mon Sep 23 01:45:26 1996
> Acct-Session-Id = "00000000"
> Client-Id = 206.26.128.251
> Acct-Status-Type = Start
> Acct-Delay-Time = 0
>
>Mon Sep 23 01:49:31 1996
> Acct-Session-Id = "00000000"
> Client-Id = 206.26.128.251
> Acct-Status-Type = Stop
> Acct-Session-Time = 0
> Acct-Delay-Time = 0
>
>Mon Sep 23 01:49:59 1996
> Acct-Session-Id = "00000000"
> Client-Id = 206.26.128.251
> Acct-Status-Type = Start
> Acct-Delay-Time = 0
>
>Mon Sep 23 01:50:59 1996
> Acct-Session-Id = "00000000"
> Client-Id = 206.26.128.251
> Acct-Status-Type = Start
> Acct-Delay-Time = 0
>
>Wed Oct 02 11:15:51 1996
> Acct-Session-Id = "00000000"
> Client-Id = 206.26.128.251
> Acct-Status-Type = Start
> Acct-Delay-Time = 751905
-MZ
-- Livingston Enterprises - Chair, Department of Interstitial Affairs Phone: 800-458-9966 510-426-0770 FAX: 510-426-8951 megazone@livingston.com For support requests: support@livingston.com <http://www.livingston.com/> Snail mail: 6920 Koll Center Parkway #220, Pleasanton, CA 94566 See me in person: Internet Expo, Boston, MA, October 16-17, Booth 422 ;-)