Re: channel bonding ISDN
Charles Scott (cscott@freeway.net)
Tue, 8 Oct 1996 03:12:36 -0400 (EDT)
David:
I haven't been able to do channel bonding but multilink ppp is working
here. Do check the information at the Livingston web site, it has most
of what you need. I found however that I can't do multilink when I have
the ports set to prompt for a host. I've been meaning to bring this up
here for comment.
In essence you need to set the (for the Bitsurfer Pro) "%A2=95%B0=2" to
get the multilink PPP going. And no you don't need to to have your BRI
lines in a hunt, you can specify 2 numbers when you dial such as
"atdxxx-xxx1&xxx-xxx2".
Chuck
On Tue, 8 Oct 1996, David Cecil wrote:
> How can I get a PortMaster PM2e-10i-u ISDN to use 2 64k channels at once
(channel bonding, multilink PPP, whatever) with either an Ascend Pipline 75
or a Motorola Bitsurfer. I called Livingston tech support and they told it
can only be done if my BRI lines are in a hunt group, which they're not. > >
If this is impossible, what's the benefit of using the PM2e-10i-u instead of
regular ISDN terminal adapters on any terminal server, such as a Computone
that can do >115kbps per port? > > David Cecil > ConnectUp, Inc. >
davidc@connectup.com
>
>