> John:
>
> To accomplish this let me try this out on you:
>
> --- Radius Table Setup: -----
>
> custisdn Password = "password"
> User-Service-Type = Framed-User,
> Framed-Protocol = PPP,
> Framed-Address = 192.168.1.1,
> Framed-Netmask = 255.255.255.252,
> Framed-Route = "208.100.88.0 192.168.1.1 1",
> Framed-Compression = Van-Jacobsen-TCP-IP,
> Framed-Filter-Id = "std.ppp",
> Framed-MTU = 1500
>
> ---- end of Radius Table Setup: ---
>
> Do I also need to add static routes and or masks in the portmaster it's self?
> like: add route 208.100.88.0 192.168.1.1 1
> add table netmask 192.168.1.0 255.255.255.252
>
> Or will the radius entry take care of everything?
You need to add the netmask, but not the route.
Also, if you are going to use RFC 1597 address space, you should put
filters on your router to prevent the addresses from leaving, or addresses
in this range entering.
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
Patrick Greenwell (510) 943-5769 voice
Systems Administrator (510) 210-2000 modem
Value Net, Inc. (510) 943-1708 fax
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/