Thanks again,
Later
Kelley
On Wed, 9 Oct 1996 patrick@value.net wrote:
> On Tue, 8 Oct 1996, PM Mailing List wrote:
>
> > John:
> >
> > To accomplish this let me try this out on you:
> >
> > --- Radius Table Setup: -----
> >
> > custisdn Password = "password"
> > User-Service-Type = Framed-User,
> > Framed-Protocol = PPP,
> > Framed-Address = 192.168.1.1,
> > Framed-Netmask = 255.255.255.252,
> > Framed-Route = "208.100.88.0 192.168.1.1 1",
> > Framed-Compression = Van-Jacobsen-TCP-IP,
> > Framed-Filter-Id = "std.ppp",
> > Framed-MTU = 1500
> >
> > ---- end of Radius Table Setup: ---
> >
> > Do I also need to add static routes and or masks in the portmaster it's self?
> > like: add route 208.100.88.0 192.168.1.1 1
> > add table netmask 192.168.1.0 255.255.255.252
> >
> > Or will the radius entry take care of everything?
>
> You need to add the netmask, but not the route.
>
> Also, if you are going to use RFC 1597 address space, you should put
> filters on your router to prevent the addresses from leaving, or addresses
> in this range entering.
>
> /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
> Patrick Greenwell (510) 943-5769 voice
> Systems Administrator (510) 210-2000 modem
> Value Net, Inc. (510) 943-1708 fax
> \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
>
>
>