Internet
|
|
|
|-------------| |--------------|
|200.200.200.1| ethernet |200.200.200.10|
|CISCO 2501 --|------------|Pipe130 |
|-------------| |--------------|
|
| T1
|
|--------------|
|200.200.201.1 |
|Pipe130 |
|--------------|
|
| ethernet
|
|--------------|
|200.200.201.10|
|PM2e30 |
|--------------|
A client calls into the PM2e30 and has a Static IP of 200.200.200.50, which
is not on the same segment as the PM2e. They get assigned the address ok
because
RADIUS gives it to them but they cannot go anywhere, and we cannot ping them
from the 200.200.200.x network. I assume this is because there is no
routing anywhere that says the 200.200.200.50 can be found on 200.200.201.x.
My question is: Can I get this to work without running RIP? The real
question I guess is how do we enable a client to call into any POP with a
Static IP.
Thanks,
Scott