Re: pm2er runs out of ram fast;2nd round with stats

John G. Thompson (jgt10@livingston.com)
Thu, 17 Oct 1996 09:09:10 -0700 (PDT)

On Wed, 16 Oct 1996, Rick Osteen wrote:
>
> I have ten async ports, 1 5-bri card and 1meg of ram.
> Everytime I get "no service" on my bri ports, I take a look at how much ram
> is left and there's like nothing, zero, zippo, nada!
> Os version is 3.3.2c1 . Is there a 3.3.3 yet and will it take care of eating
> away at my ram within 5 days(Before, I only had to reboot every 45 days).

There is a ComOS ver 3.3.3. HOwever it will not fix your RAM comsumption
problem. As more features and abilities are added to the ComOS the
memory required has increased. ISDN adds an additional memory
requirement that, as you have noticed, depletes the 1 Meg standard
configuration.

You will need to upgrade your PM memory. The requirements are 70ns or
better, 30 pin, and parity. We have been saying 1 Meg, but you can use
512K, 4 Meg or whatever. You must use four (4) simms of the same type in
the PM. You can not mix the sizes or leave some of the slots empty.

JGT
internet petrochemical primate

--
John G. Thompson      Livingston Enterprises Inc.    Phone: (800) 458-9966
JOAT(MON)             6920-220 Koll Centre Pkwy.       Fax: (510) 426-8951
support@livingston.com Pleasanton, CA 94566      http://www.livingston.com