refer to http://www.livingston.com/Tech/Docs/index.shtml to get IRX
documentation off of the web. pull down your version of ComOS doc and the
internetwork router install guide.
>
>T-1 over Frame Relay -> CSU -> IRX 211 -> Hub -> Network
>server running on NT 3.51. Currently there's only one server
>connected to the hub/IRX 211, but I'm now instructed to attach
>a second one to the hub (with a separate IP address).
as long as this new server has an IP address that is in the same subnet as
the last, there should be no router configuration necessary (unless you want
to do server specific filtering). just attach the 2nd server and specify
the IRX-211's IP address as your gateway router and you should fly (of
course you'll need domain name server address too for dns).
any further questions let us know.
Dan
>
>Can somebody help me out there with the additional set-up
>settings of the 211, so that the new (second) server can work
>independently on the same T1, from the first ?
>
>Much obliged.
>
>Bert
>
>
>
>======
>PS: rewards for 'complete help' in T-shirts and thelike if you email me your
>snailmail address, and you dont let me wait for too long :)
>======
>
>
>
>
>
>
>
==============================
Dan Geiger
Product Marketing
Livingston Enterprises
dang@livingston.com
510-485-6676
www.livingston.com