> On Sat, 26 Oct 1996, Thomas Gerard Benavides wrote:
> >
> > How do I add a 2nd class C to be recognized on my ehternet port? Can
> > this be done? If not can this be done on a Cisco 2501? If the Cisco can
> > what what are the statements so I can go and get a Cisco?
>
> You can not add a second IP network address on the PM.
>
> Yes, you can do it on a cisco 2501 as it supports non-standard
> secondary addressing.
Linux supports it quite easily too...in at least 2 ways. You can do it
with your default route gateway on your net or not on your net...linux
won't care.
What's so difficult about the following concepts?
Say we have pm.my.net with IP on ethernet port of 10.0.0.2
We have a crisco router as 10.0.0.1 and it has a T1 to the net
On the PM we set:
a network route for 10.0.0.0/24 to ether0
a default route to 10.0.0.1
a second network route for 10.0.1.0/24 to ether0
It's just some simple static routes...not rocket science. I don't
understand why we have to wait for OSPF for this work work.
------------------------------------------------------------------
Jon Lewis <jlewis@fdt.net> | Unsolicited commercial e-mail will
Network Administrator | be proof-read for $199/hr.
________Finger jlewis@inorganic5.fdt.net for PGP public key_______