RE: Init string for Sportster 33.6
Brandon (Brandon@tomatoweb.com)
Tue, 29 Oct 1996 07:40:35 -0800
At 08:18 PM 10/28/96 -0600, you wrote:
>Hmmmm....didn't have the modem table entry, but I was able to dig one up
>off of Livingston's web site.
>
>After entering the modem and resetting the ports, I dialled in with my
>33.6....I now connect at 21.6! I _was_ connecting at 24.0.
>
>I dialled into one of the 28.8s that I haven't changed yet and I
>connected at 24.0.
>
>Any suggestions why, when I upgrade to 33.6, I connect at a lower
>speed??
>
What speed are the ports set to? They should be 115,200, no parity, rts/cts
flow control, and modem control enabled. Are you doing this from telnet or
the PMConsole? If PMC, then telnet in and type "sho all". This will show you
port speed. If you have the above settings it should be fine, a call to the
telco would be my next move!
Also, has the computer with the 33.6 been reset to recognize the new modem?
hope this helps,
*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*
Brandon Miller Tomato Web Online Simply the best on
Owner 1008 1/2 10th Street the internet for
info@tomatoweb.com Sacramento, CA 95816 access, web pages,
www.tomatoweb.com (916) 441-2321 and service !
*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*^*